layer separation meaning in Chinese
脱层
Examples
- The poor cementing quality of adjustment wells has serious influences on the mini - layer separation oil production of oil field
摘要调整井固井质量差对油田细分层开采有严重影响。 - The micro shear stress sensor which based on the smart skin for boundary - layer separation point detection of delta wing has been explored in this paper
本文就以用于实现三角翼边界层分离点检测的面向灵巧蒙皮的微型剪应力传感器为对象展开研究。 - According to the theory of boundary layer and the important of boundary - layer separation point detection of delta wing , the measuring principle and structure scheme of various system alternatives based on mems technology have been discussed , selecting the prototype of better workability . base on the master piece model of micro shear stress sensor
首先，结合空气动力学的边界层原理，针对三角翼边界层分离点检测在实现主动气动控制方面的重要性，讨论了光学式、电容式和热敏式微型剪应力传感器的测量原理和结构方案，选取适合加工条件的微型剪应力传感器样件。 - According to the comparison between simulation results and laboratory measurements , this paper reaches the conclusion that the negative pressure region in convex boundary ( including broken line gradient ) not only caused by boundary layer separation , but also especially caused by centrifugal force which is the result of convex boundary
根据数值计算与模型试验结果的比较，得出具有凸形曲面边界（包括折面底坡）负压区的存在不仅是边界层分离所致，边壁弯曲使过流产生的离心力也是产生负压的重要原因的结论。 - 3 . the characteristics of boundary layer ' s transition , shape and separation are researched . the details as follows : ( l ) airfoil surface is turbulent boundary layer flows ; ( 2 ) velocity figure changed unsteady near the point of boundary layer separation due to randomicity of turbulent flow ; ( 3 ) the airfoil have better state of boundary layer separation and poor stall characteristics because of the upper surface of airfoil is flat
给出了该翼型的附面层特性：翼型表面基本为湍流附面层；在靠近附面层分离位置处，速度型形状、特别是靠近翼型表面的底部速度型形状变化不定，是湍流流动的随机性所致；该翼型具有较好的附面层分离形态，但在失速迎角附近，附面层分离形态变化剧烈、失速特性差，是翼型上翼面形状较为平坦所致。